celery/docs/userguide/tasks.rst

.. _guide-tasks:

=====================================================================
                            Tasks
=====================================================================

Tasks are the building blocks of Celery applications.

A task is a class that can be created out of any callable. It performs
dual roles in that it defines both what happens when a task is
called (sends a message), and what happens when a worker receives that message.

Every task class has a unique name, and this name is referenced in messages
so the worker can find the right function to execute.

A task message is not removed from the queue
until that message has been :term:`acknowledged` by a worker. A worker can reserve
many messages in advance and even if the worker is killed -- by power failure
or some other reason -- the message will be redelivered to another worker.

Ideally task functions should be :term:`idempotent`: meaning
the function won't cause unintended effects even if called
multiple times with the same arguments.
Since the worker cannot detect if your tasks are idempotent, the default
behavior is to acknowledge the message in advance, just before it's executed,
so that a task invocation that already started is never executed again.

If your task is idempotent you can set the :attr:`~Task.acks_late` option
to have the worker acknowledge the message *after* the task returns
instead. See also the FAQ entry :ref:`faq-acks_late-vs-retry`.

Note that the worker will acknowledge the message if the child process executing
the task is terminated (either by the task calling :func:`sys.exit`, or by signal)
even when :attr:`~Task.acks_late` is enabled.  This behavior is by purpose
as...

#. We don't want to rerun tasks that forces the kernel to send
   a :sig:`SIGSEGV` (segmentation fault) or similar signals to the process.
#. We assume that a system administrator deliberately killing the task
   does not want it to automatically restart.
#. A task that allocates too much memory is in danger of triggering the kernel
   OOM killer, the same may happen again.
#. A task that always fails when redelivered may cause a high-frequency
   message loop taking down the system.

If you really want a task to be redelivered in these scenarios you should
consider enabling the :setting:`task_reject_on_worker_lost` setting.

.. warning::

    A task that blocks indefinitely may eventually stop the worker instance
    from doing any other work.

    If you task does I/O then make sure you add timeouts to these operations,
    like adding a timeout to a web request using the :pypi:`requests` library:

    .. code-block:: python

        connect_timeout, read_timeout = 5.0, 30.0
        response = requests.get(URL, timeout=(connect_timeout, read_timeout))

    :ref:`Time limits <worker-time-limits>` are convenient for making sure all
    tasks return in a timely manner, but a time limit event will actually kill
    the process by force so only use them to detect cases where you haven't
    used manual timeouts yet.

    The default prefork pool scheduler is not friendly to long-running tasks,
    so if you have tasks that run for minutes/hours make sure you enable
    the :option:`-Ofair <celery worker -O>` command-line argument to
    the :program:`celery worker`. See :ref:`prefork-pool-prefetch` for more
    information, and for the best performance route long-running and
    short-running tasks to dedicated workers (:ref:`routing-automatic`).

    If your worker hangs then please investigate what tasks are running
    before submitting an issue, as most likely the hanging is caused
    by one or more tasks hanging on a network operation.

--

In this chapter you'll learn all about defining tasks,
and this is the **table of contents**:

.. contents::
    :local:
    :depth: 1


.. _task-basics:

Basics
======

You can easily create a task from any callable by using
the :meth:`~@task` decorator:

.. code-block:: python

    from .models import User

    @app.task
    def create_user(username, password):
        User.objects.create(username=username, password=password)


There are also many :ref:`options <task-options>` that can be set for the task,
these can be specified as arguments to the decorator:

.. code-block:: python

    @app.task(serializer='json')
    def create_user(username, password):
        User.objects.create(username=username, password=password)


.. sidebar:: How do I import the task decorator? And what's "app"?

    The task decorator is available on your :class:`@Celery` application instance,
    if you don't know what this is then please read :ref:`first-steps`.

    If you're using Django (see :ref:`django-first-steps`), or you're the author
    of a library then you probably want to use the :func:`@shared_task` decorator:

    .. code-block:: python

        from celery import shared_task

        @shared_task
        def add(x, y):
            return x + y

.. sidebar:: Multiple decorators

    When using multiple decorators in combination with the task
    decorator you must make sure that the `task`
    decorator is applied last (oddly, in Python this means it must
    be first in the list):

    .. code-block:: python

        @app.task
        @decorator2
        @decorator1
        def add(x, y):
            return x + y

Bound tasks
-----------

A task being bound means the first argument to the task will always
be the task instance (``self``), just like Python bound methods:

.. code-block:: python

    logger = get_task_logger(__name__)

    @task(bind=True)
    def add(self, x, y):
        logger.info(self.request.id)

Bound tasks are needed for retries (using :meth:`Task.retry() <@Task.retry>`),
for accessing information about the current task request, and for any
additional functionality you add to custom task base classes.

Task inheritance
----------------

The ``base`` argument to the task decorator specifies the base class of the task:

.. code-block:: python

    import celery

    class MyTask(celery.Task):

        def on_failure(self, exc, task_id, args, kwargs, einfo):
            print('{0!r} failed: {1!r}'.format(task_id, exc))

    @task(base=MyTask)
    def add(x, y):
        raise KeyError()

.. _task-names:

Names
=====

Every task must have a unique name.

If no explicit name is provided the task decorator will generate one for you,
and this name will be based on 1) the module the task is defined in, and 2)
the name of the task function.

Example setting explicit name:

.. code-block:: pycon

    >>> @app.task(name='sum-of-two-numbers')
    >>> def add(x, y):
    ...     return x + y

    >>> add.name
    'sum-of-two-numbers'

A best practice is to use the module name as a name-space,
this way names won't collide if there's already a task with that name
defined in another module.

.. code-block:: pycon

    >>> @app.task(name='tasks.add')
    >>> def add(x, y):
    ...     return x + y

You can tell the name of the task by investigating its ``.name`` attribute:

.. code-block:: pycon

    >>> add.name
    'tasks.add'

The name we specified here (``tasks.add``) is exactly the name that would've
been automatically generated for us if the task was defined in a module
named :file:`tasks.py`:

:file:`tasks.py`:

.. code-block:: python

    @app.task
    def add(x, y):
        return x + y

.. code-block:: pycon

    >>> from tasks import add
    >>> add.name
    'tasks.add'

.. _task-naming-relative-imports:

Automatic naming and relative imports
-------------------------------------

.. sidebar:: Absolute Imports

    The best practice for developers targetting Python 2 is to add the
    following to the top of **every module**:

    .. code-block:: python

        from __future__ import absolute_import

    This will force you to always use absolute imports so you will
    never have any problems with tasks using relative names.

    Absolute imports are the default in Python 3 so you don't need this
    if you target that version.

Relative imports and automatic name generation don't go well together,
so if you're using relative imports you should set the name explicitly.

For example if the client imports the module ``"myapp.tasks"``
as ``".tasks"``, and the worker imports the module as ``"myapp.tasks"``,
the generated names won't match and an :exc:`~@NotRegistered` error will
be raised by the worker.

This is also the case when using Django and using ``project.myapp``-style
naming in ``INSTALLED_APPS``:

.. code-block:: python

    INSTALLED_APPS = ['project.myapp']

If you install the app under the name ``project.myapp`` then the
tasks module will be imported as ``project.myapp.tasks``,
so you must make sure you always import the tasks using the same name:

.. code-block:: pycon

    >>> from project.myapp.tasks import mytask   # << GOOD

    >>> from myapp.tasks import mytask    # << BAD!!!

The second example will cause the task to be named differently
since the worker and the client imports the modules under different names:

.. code-block:: pycon

    >>> from project.myapp.tasks import mytask
    >>> mytask.name
    'project.myapp.tasks.mytask'

    >>> from myapp.tasks import mytask
    >>> mytask.name
    'myapp.tasks.mytask'

For this reason you must be consistent in how you
import modules, and that is also a Python best practice.

Similarly, you shouldn't use old-style relative imports:

.. code-block:: python

    from module import foo   # BAD!

    from proj.module import foo  # GOOD!

New-style relative imports are fine and can be used:

.. code-block:: python

    from .module import foo  # GOOD!

If you want to use Celery with a project already using these patterns
extensively and you don't have the time to refactor the existing code
then you can consider specifying the names explicitly instead of relying
on the automatic naming:

.. code-block:: python

    @task(name='proj.tasks.add')
    def add(x, y):
        return x + y

.. _task-name-generator-info:

Changing the automatic naming behavior
--------------------------------------

.. versionadded:: 4.0

There are some cases when the default automatic naming isn't suitable.
Consider you have many tasks within many different modules::

    project/
           /__init__.py
           /celery.py
           /moduleA/
                   /__init__.py
                   /tasks.py
           /moduleB/
                   /__init__.py
                   /tasks.py

Using the default automatic naming, each task will have a generated name
like `moduleA.tasks.taskA`, `moduleA.tasks.taskB`, `moduleB.tasks.test`,
and so on. You may want to get rid of having `tasks` in all task names.
As pointed above, you can explicitly give names for all tasks, or you
can change the automatic naming behavior by overriding
:meth:`@gen_task_name`. Continuing with the example, `celery.py`
may contain:

.. code-block:: python

    from celery import Celery

    class MyCelery(Celery):

        def gen_task_name(self, name, module):
            if module.endswith('.tasks'):
                module = module[:-6]
            return super(MyCelery, self).gen_task_name(name, module)

    app = MyCelery('main')

So each task will have a name like `moduleA.taskA`, `moduleA.taskB` and
`moduleB.test`.

.. warning::

    Make sure that your :meth:`@gen_task_name` is a pure function: meaning
    that for the same input it must always return the same output.

.. _task-request-info:

Task Request
============

:attr:`Task.request <@Task.request>` contains information and state
related to the currently executing task.

The request defines the following attributes:

:id: The unique id of the executing task.

:group: The unique id of the task's :ref:`group <canvas-group>`, if this task is a member.

:chord: The unique id of the chord this task belongs to (if the task
        is part of the header).

:correlation_id: Custom ID used for things like de-duplication.

:args: Positional arguments.

:kwargs: Keyword arguments.

:origin: Name of host that sent this task.

:retries: How many times the current task has been retried.
          An integer starting at `0`.

:is_eager: Set to :const:`True` if the task is executed locally in
           the client, not by a worker.

:eta: The original ETA of the task (if any).
      This is in UTC time (depending on the :setting:`enable_utc`
      setting).

:expires: The original expiry time of the task (if any).
          This is in UTC time (depending on the :setting:`enable_utc`
          setting).

:hostname: Node name of the worker instance executing the task.

:delivery_info: Additional message delivery information. This is a mapping
                containing the exchange and routing key used to deliver this
                task. Used by for example :meth:`Task.retry() <@Task.retry>`
                to resend the task to the same destination queue.
                Availability of keys in this dict depends on the
                message broker used.

:reply-to: Name of queue to send replies back to (used with RPC result
           backend for example).

:called_directly: This flag is set to true if the task wasn't
                  executed by the worker.

:timelimit: A tuple of the current ``(soft, hard)`` time limits active for
            this task (if any).

:callbacks: A list of signatures to be called if this task returns successfully.

:errback: A list of signatures to be called if this task fails.

:utc: Set to true the caller has UTC enabled (:setting:`enable_utc`).


.. versionadded:: 3.1

:headers:  Mapping of message headers sent with this task message
           (may be :const:`None`).

:reply_to:  Where to send reply to (queue name).

:correlation_id: Usually the same as the task id, often used in amqp
                 to keep track of what a reply is for.

.. versionadded:: 4.0

:root_id: The unique id of the first task in the workflow this task
          is part of (if any).

:parent_id: The unique id of the task that called this task (if any).

:chain: Reversed list of tasks that form a chain (if any).
        The last item in this list will be the next task to succeed the
        current task.  If using version one of the task protocol the chain
        tasks will be in ``request.callbacks`` instead.

Example
-------

An example task accessing information in the context is:

.. code-block:: python

    @app.task(bind=True)
    def dump_context(self, x, y):
        print('Executing task id {0.id}, args: {0.args!r} kwargs: {0.kwargs!r}'.format(
                self.request))


The ``bind`` argument means that the function will be a "bound method" so
that you can access attributes and methods on the task type instance.

.. _task-logging:

Logging
=======

The worker will automatically set up logging for you, or you can
configure logging manually.

A special logger is available named "celery.task", you can inherit
from this logger to automatically get the task name and unique id as part
of the logs.

The best practice is to create a common logger
for all of your tasks at the top of your module:

.. code-block:: python

    from celery.utils.log import get_task_logger

    logger = get_task_logger(__name__)

    @app.task
    def add(x, y):
        logger.info('Adding {0} + {1}'.format(x, y))
        return x + y

Celery uses the standard Python logger library,
and the documentation can be found :mod:`here <logging>`.

You can also use :func:`print`, as anything written to standard
out/-err will be redirected to the logging system (you can disable this,
see :setting:`worker_redirect_stdouts`).

.. note::

    The worker won't update the redirection if you create a logger instance
    somewhere in your task or task module.

    If you want to redirect ``sys.stdout`` and ``sys.stderr`` to a custom
    logger you have to enable this manually, for example:

    .. code-block:: python

        import sys

        logger = get_task_logger(__name__)

        @app.task(bind=True)
        def add(self, x, y):
            old_outs = sys.stdout, sys.stderr
            rlevel = self.app.conf.worker_redirect_stdouts_level
            try:
                self.app.log.redirect_stdouts_to_logger(logger, rlevel)
                print('Adding {0} + {1}'.format(x, y))
                return x + y
            finally:
                sys.stdout, sys.stderr = old_outs

.. _task-argument-checking:

Argument checking
-----------------

.. versionadded:: 4.0

Celery will verify the arguments passed when you call the task, just
like Python does when calling a normal function:

.. code-block:: pycon

    >>> @app.task
    ... def add(x, y):
    ...     return x + y

    # Calling the task with two arguments works:
    >>> add.delay(8, 8)
    <AsyncResult: f59d71ca-1549-43e0-be41-4e8821a83c0c>

    # Calling the task with only one argument fails:
    >>> add.delay(8)
    Traceback (most recent call last):
      File "<stdin>", line 1, in <module>
      File "celery/app/task.py", line 376, in delay
        return self.apply_async(args, kwargs)
      File "celery/app/task.py", line 485, in apply_async
        check_arguments(*(args or ()), **(kwargs or {}))
    TypeError: add() takes exactly 2 arguments (1 given)

You can disable the argument checking for any task by setting its
:attr:`~@Task.typing` attribute to :const:`False`:

.. code-block:: pycon

    >>> @app.task(typing=False)
    ... def add(x, y):
    ...     return x + y

    # Works locally, but the worker reciving the task will raise an error.
    >>> add.delay(8)
    <AsyncResult: f59d71ca-1549-43e0-be41-4e8821a83c0c>

Hiding sensitive information in arguments
-----------------------------------------

.. versionadded:: 4.0

When using :setting:`task_protocol` 2 or higher (default since 4.0), you can
override how positional arguments and keyword arguments are represented in logs
and monitoring events using the ``argsrepr`` and ``kwargsrepr`` calling
arguments:

.. code-block:: pycon

    >>> add.apply_async((2, 3), argsrepr='(<secret-x>, <secret-y>)')

    >>> charge.s(account, card='1234 5678 1234 5678').set(
    ...     kwargsrepr=repr({'card': '**** **** **** 5678'})
    ... ).delay()


.. warning::

    Sensitive information will still be accessible to anyone able
    to read your task message from the broker, or otherwise able intercept it.

    For this reason you should probably encrypt your message if it contains
    sensitive information, or in this example with a credit card number
    the actual number could be stored encrypted in a secure store that you retrieve
    and decrypt in the task itself.

.. _task-retry:

Retrying
========

:meth:`Task.retry() <@Task.retry>` can be used to re-execute the task,
for example in the event of recoverable errors.

When you call ``retry`` it'll send a new message, using the same
task-id, and it'll take care to make sure the message is delivered
to the same queue as the originating task.

When a task is retried this is also recorded as a task state,
so that you can track the progress of the task using the result
instance (see :ref:`task-states`).

Here's an example using ``retry``:

.. code-block:: python

    @app.task(bind=True)
    def send_twitter_status(self, oauth, tweet):
        try:
            twitter = Twitter(oauth)
            twitter.update_status(tweet)
        except (Twitter.FailWhaleError, Twitter.LoginError) as exc:
            raise self.retry(exc=exc)

.. note::

    The :meth:`Task.retry() <@Task.retry>` call will raise an exception so any
    code after the retry won't be reached. This is the :exc:`~@Retry`
    exception, it isn't handled as an error but rather as a semi-predicate
    to signify to the worker that the task is to be retried,
    so that it can store the correct state when a result backend is enabled.

    This is normal operation and always happens unless the
    ``throw`` argument to retry is set to :const:`False`.

The bind argument to the task decorator will give access to ``self`` (the
task type instance).

The ``exc`` method is used to pass exception information that's
used in logs, and when storing task results.
Both the exception and the traceback will
be available in the task state (if a result backend is enabled).

If the task has a ``max_retries`` value the current exception
will be re-raised if the max number of retries has been exceeded,
but this won't happen if:

- An ``exc`` argument wasn't given.

    In this case the :exc:`~@MaxRetriesExceededError`
    exception will be raised.

- There's no current exception

    If there's no original exception to re-raise the ``exc``
    argument will be used instead, so:

    .. code-block:: python

        self.retry(exc=Twitter.LoginError())

    will raise the ``exc`` argument given.

.. _task-retry-custom-delay:

Using a custom retry delay
--------------------------

When a task is to be retried, it can wait for a given amount of time
before doing so, and the default delay is defined by the
:attr:`~@Task.default_retry_delay`
attribute. By default this is set to 3 minutes. Note that the
unit for setting the delay is in seconds (int or float).

You can also provide the `countdown` argument to :meth:`~@Task.retry` to
override this default.

.. code-block:: python

    @app.task(bind=True, default_retry_delay=30 * 60)  # retry in 30 minutes.
    def add(self, x, y):
        try:
            something_raising()
        except Exception as exc:
            # overrides the default delay to retry after 1 minute
            raise self.retry(exc=exc, countdown=60)

.. _task-autoretry:

Automatic retry for known exceptions
------------------------------------

.. versionadded:: 4.0

Sometimes you just want to retry a task whenever a particular exception
is raised.

Fortunately, you can tell Celery to automatically retry a task using
`autoretry_for` argument in `~@Celery.task` decorator:

.. code-block:: python

    from twitter.exceptions import FailWhaleError

    @app.task(autoretry_for=(FailWhaleError,))
    def refresh_timeline(user):
        return twitter.refresh_timeline(user)

If you want to specify custom arguments for internal `~@Task.retry`
call, pass `retry_kwargs` argument to `~@Celery.task` decorator:

.. code-block:: python

    @app.task(autoretry_for=(FailWhaleError,),
              retry_kwargs={'max_retries': 5})
    def refresh_timeline(user):
        return twitter.refresh_timeline(user)

This is provided as an alternative to manually handling the exceptions,
and the example above will do the same as wrapping the task body
in a :keyword:`try` ... :keyword:`except` statement:

.. code-block:: python

    @app.task
    def refresh_timeline(user):
        try:
            twitter.refresh_timeline(user)
        except FailWhaleError as exc:
            raise div.retry(exc=exc, max_retries=5)

If you want to automatically retry on any error, simply use:

.. code-block:: python

    @app.task(autoretry_for=(Exception,))
    def x():
        ...

.. _task-options:

List of Options
===============

The task decorator can take a number of options that change the way
the task behaves, for example you can set the rate limit for a task
using the :attr:`rate_limit` option.

Any keyword argument passed to the task decorator will actually be set
as an attribute of the resulting task class, and this is a list
of the built-in attributes.

General
-------

.. _task-general-options:

.. attribute:: Task.name

    The name the task is registered as.

    You can set this name manually, or a name will be
    automatically generated using the module and class name.

    See also :ref:`task-names`.

.. attribute:: Task.request

    If the task is being executed this will contain information
    about the current request. Thread local storage is used.

    See :ref:`task-request-info`.

.. attribute:: Task.max_retries

    Only applies if the task calls ``self.retry`` or if the task is decorated
    with the :ref:`autoretry_for <task-autoretry>` argument.

    The maximum number of attempted retries before giving up.
    If the number of retries exceeds this value a :exc:`~@MaxRetriesExceededError`
    exception will be raised.

    .. note::

        You have to call :meth:`~@Task.retry`
        manually, as it won't automatically retry on exception..

    The default is ``3``.
    A value of :const:`None` will disable the retry limit and the
    task will retry forever until it succeeds.

.. attribute:: Task.throws

    Optional tuple of expected error classes that shouldn't be regarded
    as an actual error.

    Errors in this list will be reported as a failure to the result backend,
    but the worker won't log the event as an error, and no traceback will
    be included.

    Example:

    .. code-block:: python

        @task(throws=(KeyError, HttpNotFound)):
        def get_foo():
            something()

    Error types:

    - Expected errors (in ``Task.throws``)

        Logged with severity ``INFO``, traceback excluded.

    - Unexpected errors

        Logged with severity ``ERROR``, with traceback included.

.. attribute:: Task.default_retry_delay

    Default time in seconds before a retry of the task
    should be executed. Can be either :class:`int` or :class:`float`.
    Default is a three minute delay.

.. attribute:: Task.rate_limit

    Set the rate limit for this task type (limits the number of tasks
    that can be run in a given time frame). Tasks will still complete when
    a rate limit is in effect, but it may take some time before it's allowed to
    start.

    If this is :const:`None` no rate limit is in effect.
    If it is an integer or float, it is interpreted as "tasks per second".

    The rate limits can be specified in seconds, minutes or hours
    by appending `"/s"`, `"/m"` or `"/h"` to the value. Tasks will be evenly
    distributed over the specified time frame.

    Example: `"100/m"` (hundred tasks a minute). This will enforce a minimum
    delay of 600ms between starting two tasks on the same worker instance.

    Default is the :setting:`task_default_rate_limit` setting:
    if not specified means rate limiting for tasks is disabled by default.

    Note that this is a *per worker instance* rate limit, and not a global
    rate limit. To enforce a global rate limit (e.g., for an API with a
    maximum number of  requests per second), you must restrict to a given
    queue.

    .. note::

        This attribute is ignored if the task is requested with an ETA.

.. attribute:: Task.time_limit

    The hard time limit, in seconds, for this task.
    When not set the workers default is used.

.. attribute:: Task.soft_time_limit

    The soft time limit for this task.
    When not set the workers default is used.

.. attribute:: Task.ignore_result

    Don't store task state. Note that this means you can't use
    :class:`~celery.result.AsyncResult` to check if the task is ready,
    or get its return value.

.. attribute:: Task.store_errors_even_if_ignored

    If :const:`True`, errors will be stored even if the task is configured
    to ignore results.

.. attribute:: Task.serializer

    A string identifying the default serialization
    method to use. Defaults to the :setting:`task_serializer`
    setting. Can be `pickle`, `json`, `yaml`, or any custom
    serialization methods that have been registered with
    :mod:`kombu.serialization.registry`.

    Please see :ref:`calling-serializers` for more information.

.. attribute:: Task.compression

    A string identifying the default compression scheme to use.

    Defaults to the :setting:`task_compression` setting.
    Can be `gzip`, or `bzip2`, or any custom compression schemes
    that have been registered with the :mod:`kombu.compression` registry.

    Please see :ref:`calling-compression` for more information.

.. attribute:: Task.backend

    The result store backend to use for this task. An instance of one of the
    backend classes in `celery.backends`. Defaults to `app.backend`,
    defined by the :setting:`result_backend` setting.

.. attribute:: Task.acks_late

    If set to :const:`True` messages for this task will be acknowledged
    **after** the task has been executed, not *just before* (the default
    behavior).

    Note: This means the task may be executed multiple times should the worker
    crash in the middle of execution.  Make sure your tasks are
    :term:`idempotent`.

    The global default can be overridden by the :setting:`task_acks_late`
    setting.

.. _task-track-started:

.. attribute:: Task.track_started

    If :const:`True` the task will report its status as "started"
    when the task is executed by a worker.
    The default value is :const:`False` as the normal behavior is to not
    report that level of granularity. Tasks are either pending, finished,
    or waiting to be retried. Having a "started" status can be useful for
    when there are long running tasks and there's a need to report what
    task is currently running.

    The host name and process id of the worker executing the task
    will be available in the state meta-data (e.g., `result.info['pid']`)

    The global default can be overridden by the
    :setting:`task_track_started` setting.


.. seealso::

    The API reference for :class:`~@Task`.

.. _task-states:

States
======

Celery can keep track of the tasks current state. The state also contains the
result of a successful task, or the exception and traceback information of a
failed task.

There are several *result backends* to choose from, and they all have
different strengths and weaknesses (see :ref:`task-result-backends`).

During its lifetime a task will transition through several possible states,
and each state may have arbitrary meta-data attached to it. When a task
moves into a new state the previous state is
forgotten about, but some transitions can be deducted, (e.g., a task now
in the :state:`FAILED` state, is implied to have been in the
:state:`STARTED` state at some point).

There are also sets of states, like the set of
:state:`FAILURE_STATES`, and the set of :state:`READY_STATES`.

The client uses the membership of these sets to decide whether
the exception should be re-raised (:state:`PROPAGATE_STATES`), or whether
the state can be cached (it can if the task is ready).

You can also define :ref:`custom-states`.

.. _task-result-backends:

Result Backends
---------------

If you want to keep track of tasks or need the return values, then Celery
must store or send the states somewhere so that they can be retrieved later.
There are several built-in result backends to choose from: SQLAlchemy/Django ORM,
Memcached, RabbitMQ/QPid (``rpc``), and Redis -- or you can define your own.

No backend works well for every use case.
You should read about the strengths and weaknesses of each backend, and choose
the most appropriate for your needs.

.. seealso::

    :ref:`conf-result-backend`

RPC Result Backend (RabbitMQ/QPid)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

The RPC result backend (`rpc://`) is special as it doesn't actually *store*
the states, but rather sends them as messages. This is an important difference as it
means that a result *can only be retrieved once*, and *only by the client
that initiated the task*. Two different processes can't wait for the same result.

Even with that limitation, it is an excellent choice if you need to receive
state changes in real-time. Using messaging means the client doesn't have to
poll for new states.

The messages are transient (non-persistent) by default, so the results will
disappear if the broker restarts. You can configure the result backend to send
persistent messages using the :setting:`result_persistent` setting.

Database Result Backend
~~~~~~~~~~~~~~~~~~~~~~~

Keeping state in the database can be convenient for many, especially for
web applications with a database already in place, but it also comes with
limitations.

* Polling the database for new states is expensive, and so you should
  increase the polling intervals of operations, such as `result.get()`.

* Some databases use a default transaction isolation level that
  isn't suitable for polling tables for changes.

  In MySQL the default transaction isolation level is `REPEATABLE-READ`:
  meaning the transaction won't see changes made by other transactions until
  the current transaction is committed.

  Changing that to the `READ-COMMITTED` isolation level is recommended.

.. _task-builtin-states:

Built-in States
---------------

.. state:: PENDING

PENDING
~~~~~~~

Task is waiting for execution or unknown.
Any task id that's not known is implied to be in the pending state.

.. state:: STARTED

STARTED
~~~~~~~

Task has been started.
Not reported by default, to enable please see :attr:`@Task.track_started`.

:meta-data: `pid` and `hostname` of the worker process executing
            the task.

.. state:: SUCCESS

SUCCESS
~~~~~~~

Task has been successfully executed.

:meta-data: `result` contains the return value of the task.
:propagates: Yes
:ready: Yes

.. state:: FAILURE

FAILURE
~~~~~~~

Task execution resulted in failure.

:meta-data: `result` contains the exception occurred, and `traceback`
            contains the backtrace of the stack at the point when the
            exception was raised.
:propagates: Yes

.. state:: RETRY

RETRY
~~~~~

Task is being retried.

:meta-data: `result` contains the exception that caused the retry,
            and `traceback` contains the backtrace of the stack at the point
            when the exceptions was raised.
:propagates: No

.. state:: REVOKED

REVOKED
~~~~~~~

Task has been revoked.

:propagates: Yes

.. _custom-states:

Custom states
-------------

You can easily define your own states, all you need is a unique name.
The name of the state is usually an uppercase string. As an example
you could have a look at the :mod:`abortable tasks <~celery.contrib.abortable>`
which defines a custom :state:`ABORTED` state.

Use :meth:`~@Task.update_state` to update a task's state:.

.. code-block:: python

    @app.task(bind=True)
    def upload_files(self, filenames):
        for i, file in enumerate(filenames):
            if not self.request.called_directly:
                self.update_state(state='PROGRESS',
                    meta={'current': i, 'total': len(filenames)})


Here I created the state `"PROGRESS"`, telling any application
aware of this state that the task is currently in progress, and also where
it is in the process by having `current` and `total` counts as part of the
state meta-data. This can then be used to create progress bars for example.

.. _pickling_exceptions:

Creating pickleable exceptions
------------------------------

A rarely known Python fact is that exceptions must conform to some
simple rules to support being serialized by the pickle module.

Tasks that raise exceptions that aren't pickleable won't work
properly when Pickle is used as the serializer.

To make sure that your exceptions are pickleable the exception
*MUST* provide the original arguments it was instantiated
with in its ``.args`` attribute. The simplest way
to ensure this is to have the exception call ``Exception.__init__``.

Let's look at some examples that work, and one that doesn't:

.. code-block:: python


    # OK:
    class HttpError(Exception):
        pass

    # BAD:
    class HttpError(Exception):

        def __init__(self, status_code):
            self.status_code = status_code

    # OK:
    class HttpError(Exception):

        def __init__(self, status_code):
            self.status_code = status_code
            Exception.__init__(self, status_code)  # <-- REQUIRED


So the rule is:
For any exception that supports custom arguments ``*args``,
``Exception.__init__(self, *args)`` must be used.

There's no special support for *keyword arguments*, so if you
want to preserve keyword arguments when the exception is unpickled
you have to pass them as regular args:

.. code-block:: python

    class HttpError(Exception):

        def __init__(self, status_code, headers=None, body=None):
            self.status_code = status_code
            self.headers = headers
            self.body = body

            super(HttpError, self).__init__(status_code, headers, body)

.. _task-semipredicates:

Semipredicates
==============

The worker wraps the task in a tracing function that records the final
state of the task. There are a number of exceptions that can be used to
signal this function to change how it treats the return of the task.

.. _task-semipred-ignore:

Ignore
------

The task may raise :exc:`~@Ignore` to force the worker to ignore the
task. This means that no state will be recorded for the task, but the
message is still acknowledged (removed from queue).

This can be used if you want to implement custom revoke-like
functionality, or manually store the result of a task.

Example keeping revoked tasks in a Redis set:

.. code-block:: python

    from celery.exceptions import Ignore

    @app.task(bind=True)
    def some_task(self):
        if redis.ismember('tasks.revoked', self.request.id):
            raise Ignore()

Example that stores results manually:

.. code-block:: python

    from celery import states
    from celery.exceptions import Ignore

    @app.task(bind=True)
    def get_tweets(self, user):
        timeline = twitter.get_timeline(user)
        if not self.request.called_directly:
            self.update_state(state=states.SUCCESS, meta=timeline)
        raise Ignore()

.. _task-semipred-reject:

Reject
------

The task may raise :exc:`~@Reject` to reject the task message using
AMQPs ``basic_reject`` method. This won't have any effect unless
:attr:`Task.acks_late` is enabled.

Rejecting a message has the same effect as acking it, but some
brokers may implement additional functionality that can be used.
For example RabbitMQ supports the concept of `Dead Letter Exchanges`_
where a queue can be configured to use a dead letter exchange that rejected
messages are redelivered to.

.. _`Dead Letter Exchanges`: http://www.rabbitmq.com/dlx.html

Reject can also be used to re-queue messages, but please be very careful
when using this as it can easily result in an infinite message loop.

Example using reject when a task causes an out of memory condition:

.. code-block:: python

    import errno
    from celery.exceptions import Reject

    @app.task(bind=True, acks_late=True)
    def render_scene(self, path):
        file = get_file(path)
        try:
            renderer.render_scene(file)

        # if the file is too big to fit in memory
        # we reject it so that it's redelivered to the dead letter exchange
        # and we can manually inspect the situation.
        except MemoryError as exc:
            raise Reject(exc, requeue=False)
        except OSError as exc:
            if exc.errno == errno.ENOMEM:
                raise Reject(exc, requeue=False)

        # For any other error we retry after 10 seconds.
        except Exception as exc:
            raise self.retry(exc, countdown=10)

Example re-queuing the message:

.. code-block:: python

    from celery.exceptions import Reject

    @app.task(bind=True, acks_late=True)
    def requeues(self):
        if not self.request.delivery_info['redelivered']:
            raise Reject('no reason', requeue=True)
        print('received two times')

Consult your broker documentation for more details about the ``basic_reject``
method.


.. _task-semipred-retry:

Retry
-----

The :exc:`~@Retry` exception is raised by the ``Task.retry`` method
to tell the worker that the task is being retried.

.. _task-custom-classes:

Custom task classes
===================

All tasks inherit from the :class:`@Task` class.
The :meth:`~@Task.run` method becomes the task body.

As an example, the following code,

.. code-block:: python

    @app.task
    def add(x, y):
        return x + y


will do roughly this behind the scenes:

.. code-block:: python

    class _AddTask(app.Task):

        def run(self, x, y):
            return x + y
    add = app.tasks[_AddTask.name]


Instantiation
-------------

A task is **not** instantiated for every request, but is registered
in the task registry as a global instance.

This means that the ``__init__`` constructor will only be called
once per process, and that the task class is semantically closer to an
Actor.

If you have a task,

.. code-block:: python

    from celery import Task

    class NaiveAuthenticateServer(Task):

        def __init__(self):
            self.users = {'george': 'password'}

        def run(self, username, password):
            try:
                return self.users[username] == password
            except KeyError:
                return False

And you route every request to the same process, then it
will keep state between requests.

This can also be useful to cache resources,
For example, a base Task class that caches a database connection:

.. code-block:: python

    from celery import Task

    class DatabaseTask(Task):
        _db = None

        @property
        def db(self):
            if self._db is None:
                self._db = Database.connect()
            return self._db


that can be added to tasks like this:

.. code-block:: python


    @app.task(base=DatabaseTask)
    def process_rows():
        for row in process_rows.db.table.all():
            process_row(row)

The ``db`` attribute of the ``process_rows`` task will then
always stay the same in each process.

Handlers
--------

.. method:: after_return(self, status, retval, task_id, args, kwargs, einfo)

    Handler called after the task returns.

    :param status: Current task state.
    :param retval: Task return value/exception.
    :param task_id: Unique id of the task.
    :param args: Original arguments for the task that returned.
    :param kwargs: Original keyword arguments for the task
                   that returned.

    :keyword einfo: :class:`~billiard.einfo.ExceptionInfo`
                    instance, containing the traceback (if any).

    The return value of this handler is ignored.

.. method:: on_failure(self, exc, task_id, args, kwargs, einfo)

    This is run by the worker when the task fails.

    :param exc: The exception raised by the task.
    :param task_id: Unique id of the failed task.
    :param args: Original arguments for the task that failed.
    :param kwargs: Original keyword arguments for the task
                       that failed.

    :keyword einfo: :class:`~billiard.einfo.ExceptionInfo`
                           instance, containing the traceback.

    The return value of this handler is ignored.

.. method:: on_retry(self, exc, task_id, args, kwargs, einfo)

    This is run by the worker when the task is to be retried.

    :param exc: The exception sent to :meth:`~@Task.retry`.
    :param task_id: Unique id of the retried task.
    :param args: Original arguments for the retried task.
    :param kwargs: Original keyword arguments for the retried task.

    :keyword einfo: :class:`~billiard.einfo.ExceptionInfo`
                    instance, containing the traceback.

    The return value of this handler is ignored.

.. method:: on_success(self, retval, task_id, args, kwargs)

    Run by the worker if the task executes successfully.

    :param retval: The return value of the task.
    :param task_id: Unique id of the executed task.
    :param args: Original arguments for the executed task.
    :param kwargs: Original keyword arguments for the executed task.

    The return value of this handler is ignored.

.. _task-how-they-work:

How it works
============

Here come the technical details. This part isn't something you need to know,
but you may be interested.

All defined tasks are listed in a registry. The registry contains
a list of task names and their task classes. You can investigate this registry
yourself:

.. code-block:: pycon

    >>> from proj.celery import app
    >>> app.tasks
    {'celery.chord_unlock':
        <@task: celery.chord_unlock>,
     'celery.backend_cleanup':
        <@task: celery.backend_cleanup>,
     'celery.chord':
        <@task: celery.chord>}

This is the list of tasks built-in to Celery. Note that tasks
will only be registered when the module they're defined in is imported.

The default loader imports any modules listed in the
:setting:`imports` setting.

The :meth:`@task` decorator is responsible for registering your task
in the applications task registry.

When tasks are sent, no actual function code is sent with it, just the name
of the task to execute. When the worker then receives the message it can look
up the name in its task registry to find the execution code.

This means that your workers should always be updated with the same software
as the client. This is a drawback, but the alternative is a technical
challenge that's yet to be solved.

.. _task-best-practices:

Tips and Best Practices
=======================

.. _task-ignore_results:

Ignore results you don't want
-----------------------------

If you don't care about the results of a task, be sure to set the
:attr:`~@Task.ignore_result` option, as storing results
wastes time and resources.

.. code-block:: python

    @app.task(ignore_result=True)
    def mytask():
        something()

Results can even be disabled globally using the :setting:`task_ignore_result`
setting.

More optimization tips
----------------------

You find additional optimization tips in the
:ref:`Optimizing Guide <guide-optimizing>`.

.. _task-synchronous-subtasks:

Avoid launching synchronous subtasks
------------------------------------

Having a task wait for the result of another task is really inefficient,
and may even cause a deadlock if the worker pool is exhausted.

Make your design asynchronous instead, for example by using *callbacks*.

**Bad**:

.. code-block:: python

    @app.task
    def update_page_info(url):
        page = fetch_page.delay(url).get()
        info = parse_page.delay(url, page).get()
        store_page_info.delay(url, info)

    @app.task
    def fetch_page(url):
        return myhttplib.get(url)

    @app.task
    def parse_page(url, page):
        return myparser.parse_document(page)

    @app.task
    def store_page_info(url, info):
        return PageInfo.objects.create(url, info)


**Good**:

.. code-block:: python

    def update_page_info(url):
        # fetch_page -> parse_page -> store_page
        chain = fetch_page.s(url) | parse_page.s() | store_page_info.s(url)
        chain()

    @app.task()
    def fetch_page(url):
        return myhttplib.get(url)

    @app.task()
    def parse_page(page):
        return myparser.parse_document(page)

    @app.task(ignore_result=True)
    def store_page_info(info, url):
        PageInfo.objects.create(url=url, info=info)


Here I instead created a chain of tasks by linking together
different :func:`~celery.signature`'s.
You can read about chains and other powerful constructs
at :ref:`designing-workflows`.

By default celery will not enable you to run tasks within task synchronously
in rare or extreme cases you might have to do so.
**WARNING**:
enabling subtasks run synchronously is not recommended!

.. code-block:: python

    @app.task
    def update_page_info(url):
        page = fetch_page.delay(url).get(disable_sync_subtasks=False)
        info = parse_page.delay(url, page).get(disable_sync_subtasks=False)
        store_page_info.delay(url, info)

    @app.task
    def fetch_page(url):
        return myhttplib.get(url)

    @app.task
    def parse_page(url, page):
        return myparser.parse_document(page)

    @app.task
    def store_page_info(url, info):
        return PageInfo.objects.create(url, info)


.. _task-performance-and-strategies:

Performance and Strategies
==========================

.. _task-granularity:

Granularity
-----------

The task granularity is the amount of computation needed by each subtask.
In general it is better to split the problem up into many small tasks rather
than have a few long running tasks.

With smaller tasks you can process more tasks in parallel and the tasks
won't run long enough to block the worker from processing other waiting tasks.

However, executing a task does have overhead. A message needs to be sent, data
may not be local, etc. So if the tasks are too fine-grained the
overhead added probably removes any benefit.

.. seealso::

    The book `Art of Concurrency`_ has a section dedicated to the topic
    of task granularity [AOC1]_.

.. _`Art of Concurrency`: http://oreilly.com/catalog/9780596521547

.. [AOC1] Breshears, Clay. Section 2.2.1, "The Art of Concurrency".
   O'Reilly Media, Inc. May 15, 2009. ISBN-13 978-0-596-52153-0.

.. _task-data-locality:

Data locality
-------------

The worker processing the task should be as close to the data as
possible. The best would be to have a copy in memory, the worst would be a
full transfer from another continent.

If the data is far away, you could try to run another worker at location, or
if that's not possible - cache often used data, or preload data you know
is going to be used.

The easiest way to share data between workers is to use a distributed cache
system, like `memcached`_.

.. seealso::

    The paper `Distributed Computing Economics`_ by Jim Gray is an excellent
    introduction to the topic of data locality.

.. _`Distributed Computing Economics`:
    http://research.microsoft.com/pubs/70001/tr-2003-24.pdf

.. _`memcached`: http://memcached.org/

.. _task-state:

State
-----

Since celery is a distributed system, you can't know which process, or
on what machine the task will be executed. You can't even know if the task will
run in a timely manner.

The ancient async sayings tells us that “asserting the world is the
responsibility of the task”. What this means is that the world view may
have changed since the task was requested, so the task is responsible for
making sure the world is how it should be;  If you have a task
that re-indexes a search engine, and the search engine should only be
re-indexed at maximum every 5 minutes, then it must be the tasks
responsibility to assert that, not the callers.

Another gotcha is Django model objects. They shouldn't be passed on as
arguments to tasks. It's almost always better to re-fetch the object from
the database when the task is running instead,  as using old data may lead
to race conditions.

Imagine the following scenario where you have an article and a task
that automatically expands some abbreviations in it:

.. code-block:: python

    class Article(models.Model):
        title = models.CharField()
        body = models.TextField()

    @app.task
    def expand_abbreviations(article):
        article.body.replace('MyCorp', 'My Corporation')
        article.save()

First, an author creates an article and saves it, then the author
clicks on a button that initiates the abbreviation task:

.. code-block:: pycon

    >>> article = Article.objects.get(id=102)
    >>> expand_abbreviations.delay(article)

Now, the queue is very busy, so the task won't be run for another 2 minutes.
In the meantime another author makes changes to the article, so
when the task is finally run, the body of the article is reverted to the old
version because the task had the old body in its argument.

Fixing the race condition is easy, just use the article id instead, and
re-fetch the article in the task body:

.. code-block:: python

    @app.task
    def expand_abbreviations(article_id):
        article = Article.objects.get(id=article_id)
        article.body.replace('MyCorp', 'My Corporation')
        article.save()

.. code-block:: pycon

    >>> expand_abbreviations.delay(article_id)

There might even be performance benefits to this approach, as sending large
messages may be expensive.

.. _task-database-transactions:

Database transactions
---------------------

Let's have a look at another example:

.. code-block:: python

    from django.db import transaction

    @transaction.commit_on_success
    def create_article(request):
        article = Article.objects.create()
        expand_abbreviations.delay(article.pk)

This is a Django view creating an article object in the database,
then passing the primary key to a task. It uses the `commit_on_success`
decorator, that will commit the transaction when the view returns, or
roll back if the view raises an exception.

There's a race condition if the task starts executing
before the transaction has been committed; The database object doesn't exist
yet!

The solution is to use the ``on_commit`` callback to launch your celery task
once all transactions have been committed successfully.

.. code-block:: python

    from django.db.transaction import on_commit

    def create_article(request):
        article = Article.objects.create()
        on_commit(lambda: expand_abbreviations.delay(article.pk))

.. note::
    ``on_commit`` is available in Django 1.9 and above, if you are using a
    version prior to that then the `django-transaction-hooks`_ library
    adds support for this.

.. _`django-transaction-hooks`: https://github.com/carljm/django-transaction-hooks

.. _task-example:

Example
=======

Let's take a real world example: a blog where comments posted need to be
filtered for spam. When the comment is created, the spam filter runs in the
background, so the user doesn't have to wait for it to finish.

I have a Django blog application allowing comments
on blog posts. I'll describe parts of the models/views and tasks for this
application.

``blog/models.py``
------------------

The comment model looks like this:

.. code-block:: python

    from django.db import models
    from django.utils.translation import ugettext_lazy as _


    class Comment(models.Model):
        name = models.CharField(_('name'), max_length=64)
        email_address = models.EmailField(_('email address'))
        homepage = models.URLField(_('home page'),
                                   blank=True, verify_exists=False)
        comment = models.TextField(_('comment'))
        pub_date = models.DateTimeField(_('Published date'),
                                        editable=False, auto_add_now=True)
        is_spam = models.BooleanField(_('spam?'),
                                      default=False, editable=False)

        class Meta:
            verbose_name = _('comment')
            verbose_name_plural = _('comments')


In the view where the comment is posted, I first write the comment
to the database, then I launch the spam filter task in the background.

.. _task-example-blog-views:

``blog/views.py``
-----------------

.. code-block:: python

    from django import forms
    from django.http import HttpResponseRedirect
    from django.template.context import RequestContext
    from django.shortcuts import get_object_or_404, render_to_response

    from blog import tasks
    from blog.models import Comment


    class CommentForm(forms.ModelForm):

        class Meta:
            model = Comment


    def add_comment(request, slug, template_name='comments/create.html'):
        post = get_object_or_404(Entry, slug=slug)
        remote_addr = request.META.get('REMOTE_ADDR')

        if request.method == 'post':
            form = CommentForm(request.POST, request.FILES)
            if form.is_valid():
                comment = form.save()
                # Check spam asynchronously.
                tasks.spam_filter.delay(comment_id=comment.id,
                                        remote_addr=remote_addr)
                return HttpResponseRedirect(post.get_absolute_url())
        else:
            form = CommentForm()

        context = RequestContext(request, {'form': form})
        return render_to_response(template_name, context_instance=context)


To filter spam in comments I use `Akismet`_, the service
used to filter spam in comments posted to the free blog platform
`Wordpress`. `Akismet`_ is free for personal use, but for commercial use you
need to pay. You have to sign up to their service to get an API key.

To make API calls to `Akismet`_ I use the `akismet.py`_ library written by
`Michael Foord`_.

.. _task-example-blog-tasks:

``blog/tasks.py``
-----------------

.. code-block:: python

    from celery import Celery

    from akismet import Akismet

    from django.core.exceptions import ImproperlyConfigured
    from django.contrib.sites.models import Site

    from blog.models import Comment


    app = Celery(broker='amqp://')


    @app.task
    def spam_filter(comment_id, remote_addr=None):
        logger = spam_filter.get_logger()
        logger.info('Running spam filter for comment %s', comment_id)

        comment = Comment.objects.get(pk=comment_id)
        current_domain = Site.objects.get_current().domain
        akismet = Akismet(settings.AKISMET_KEY, 'http://{0}'.format(domain))
        if not akismet.verify_key():
            raise ImproperlyConfigured('Invalid AKISMET_KEY')


        is_spam = akismet.comment_check(user_ip=remote_addr,
                            comment_content=comment.comment,
                            comment_author=comment.name,
                            comment_author_email=comment.email_address)
        if is_spam:
            comment.is_spam = True
            comment.save()

        return is_spam

.. _`Akismet`: http://akismet.com/faq/
.. _`akismet.py`: http://www.voidspace.org.uk/downloads/akismet.py
.. _`Michael Foord`: http://www.voidspace.org.uk/